Equipment & Services
Remote Water Solutions LP
Remote provides best-in-class chlorine dioxide generators. Our inline generators are optimized for “frac-on-the-fly”
- All frac water passes directly through the header on the ClO2 generator, where ClO2 is generated and applied. This eliminates hoses carrying concentrated ClO2 and simplifies hookups
- A small overall footprint eliminates the need for a second header trailer
- Highly efficient reaction
- Simple installation and setup. Connect your water transfer line(s) to the flanges, insert the chemical wands in the totes, and you are ready to go
- Mag meter on the headers for high-accuracy measurement of the water to be treated
- Vacuum-based design: chemical feeds are never pumped
- Multiple access levels in the software limit access to the features needed
- Wide production range — 40:1 turndown ratio
Chemistry
- Proven reaction chemistry (Acid / Bleach / Chlorite)
- 2NaClO2 + NaOCl + 2HCl — 2ClO2 + H2O + 3NaCl
- Highest efficiency – 95% efficient
- Check valves on all chemicals to avoid backflow
- ClO2 produced is immediately diluted
Electrical / Controls
- Certified UL508A
- Powered by single phase 220 VAC 30 Amp service
- Use of low voltage (24 Volt DC) control instrumentation for safety
- Simple HMI touch-screen operation with event logging and ethernet connectivity
- Monitoring of all chemical lines and water flows to ensure proper and safe operation
Features And Benefits
- Multiple operating modes for greater operational flexibility
- Fully automated operation ensures accurate dosing and residual control
- Redundant motive water pumps
- Water and chemical flow monitoring with mag flow meters — 0.2% accuracy
- Remote monitoring capability
- No “pre-reaction” chamber required
- Safe concentration levels
- No deposits to clean
- No salt scaling in eductor
- Eductor-based design for increased safety (elimination of all chemical pumps)
- Increased chemical reaction safety due to 100% of the chemical reaction occurring in water
- Water leaves generator at treatment dose levels
- ClO2 generation rates of 100 ppd to 10,000 ppd
- Wide production range (100 ppd to 4000 ppd) with basic configuration
- Small footprint ~85” x L, 47” x W, 72” x H
- Optional online residual monitoring
- Engineered with industry-leading safety features
Remote Waste
Wastewater Storage
Remote has several competitive options for storing your wastewater! If you haven’t been able to secure the necessary permits to treat and safely discharge your wastewater, store, and haul may be your best option.
Call us for a hassle-free installation and peace of mind, knowing you’re in Remote’s experienced and skilled hands.
Remote’s Wastewater Storage Tankage Options:
| Volume | |
|---|---|
| 57 gal | 0.22 m³ |
| 300 gal | 1.13 m³ |
| 600 gal | 2.27 m³ |
| 800 gal | 3.03 m³ |
| 1100 gal | 4.16 m³ |
| 4500 gal(100 bbl) | 17.03 m³ |
Additional Services:
Remote’s own line of heat trace (just arrived) 8 Watt Per foot 120 V
- Heat Trace
- Bear Fencing
Remote’s Mobile Completions Units (MCU)
Remote’s MCUs are specifically designed to meet the needs of Oil and Gas Operators. We’ve integrated membrane wastewater treatment technology, light towers, backup generators, potable water storage, and a heated area with a full-sized sink, toilette, and shower, all at a highly competitive rate for the Service Excellence you’ve come to expect from Remote.
Key Features
- 1 x 20-50 pers. Membrane Wastewater Treatment Plant
- 2 x 125 kW Backup Generators
- 1 x 2700L Diesel Fuel Storage Tank
- 2 x Light Towers – 4 x 200W Lights per Tower
- 2 x Full Sized Latrines
- 1 x Full Sized Sink with undershelf storage capacity
- 1 x Full Sized Shower with Emergency Eyewash Station
- 1 x 9.1 m3 Potable Water Storage Tank
Activated Sludge/Extended Aeration and MBR WWTP’s
Remote’s Activated Sludge Extended Aeration Wastewater Treatment Plants (ASEA-WWTP) are an efficient means of treating and safely discharging camp or municipal septic waste that would otherwise need to be stored and trucked off-site for disposal. Remote’s trained and skilled operators will install the plant and lift stations, winterize it as necessary, and perform all Regulatory compliance-related monitoring to ensure that the last thing on your mind is your septic treatment system.
We have the WWTP to meet your needs!
| Water Treatment Capacity Per Day | Camp Size |
|---|---|
| 2.8 m³ (740 gal.) | 10-25 people |
| 3.8 m³ (1,000 gal.) | 20-15 people |
| 15.1 m³ (4,000 gal.) | 40-80 people |
| 18.9 m³ (5,000 gal.) | 50-100 people |
| 37.9 m³ (10,000 gal.) | 150-200 people |
| 94.6 m³ (25,000 gal.) | 201-500 people |
Additional Services
- Heat Trace
- Bear Fencing
Wastewater & Water Treatment Operators for longer term projects
At Remmote, we take pride in offering highly skilled and experienced Wastewater & Water Treatment Operators for longer-term projects. These professionals play a crucial role in ensuring the efficient and environmentally responsible management of water resources in the oil and gas industry. Our team of operators is equipped with the latest technologies and comprehensive knowledge of industry regulations, making them adept at handling complex treatment processes. With a commitment to sustainability and safety, our operators are dedicated to optimizing water treatment systems, minimizing waste, and upholding the highest environmental standards. When you partner with us for your longer-term projects, you can trust that your wastewater and water treatment needs will be met with expertise and precision, while also contributing to a cleaner, greener future.
Water Bacterial / Lab Testing
Remote Wastewater group partners with OSP Microcheck to test the water bacteria used in your project. We can offer several testing technologies to generate quality data that accurately identifies and evaluates problematic microbes and supports sound decision-making.